Product details
The DP series amplifiers feature a 2U chassis made of high-strength electro-galvanized steel, designed to prevent oxidation and rusting
due to long-term use in harsh environments. The front panel is made from 2mm thick steel with large-area perforations, and is equipped
with 5mm soundproofing cotton to maximize air convection management.
The dual-channel amplifier uses two independent amplification modules, while the four-channel amplifier comprises four independent
amplification modules. Each module has completely independent power rectification and amplification.
Operating voltage: AC 80V-253V, 50Hz.
Product technical specifications
Rated power | 4×4000W/4Ω；4×2200W/8Ω | Damping coefficient | ＞500（8Ω/1kHz ） |
Frequency response | 20Hz-25kHz（≤0.5dB) | Peak program power consumption | ≤220V/16A |
Distortion rate | THD+10: <0.1% | Power requirements | Alternating Current 180V-240V/50Hz |
Signal-to-noise ratio | （20 Hz - 20 kHz,A Weighted）：>100dB | Weight | 13KG |
Input Sensitivity | -3dB/-6dB/-9dB（Optional） | Size（mm） | W：483 D：422 H：90（mm） |
Input impedance | Balanced input 20kΩ；Unbalanced input 10kΩ | Channel | 4 way |